Description

The billet wheel is lighter than the cast wheel, its an entirely new compressor wheel design that is more efficient than the older cast wheel. The old design worked well for many years, but as technology progresses, we get better, more efficient designs. This turbocharger comes in a wide range of housing combinations. Most 4cyl applications will use the T3 back housing configuration while most 6 and 8 cyl applications will go with the T4 exhaust housings. If you need any help picking out the correct turbo to fit your goals and budget, please contact one of our experienced sales staff to guide you through the selection process.

PTE’s PT5858 Turbocharger features the following:
• Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging
• Higher efficiency and faster transient response for maximum power and performance
• 58mm inducer compressor wheel
• Compressor cover options:
– “B” compressor cover 2.8″ inlet/2.0″ outlet
– “E” compressor cover 3.0″ inlet/2.0″ outlet
– “Ported S” compressor cover 4.0″ inlet/2.5″ outlet
• 58mm, 76 trim turbine wheel
• Turbine housing options:
– T3 .48, .63 or .82 A/R with 4 bolt (2.5″) discharge
– T3 .48 or .63 A/R with 5 bolt discharge (with or without wastegate hole)
– T3 .48, .63 or .82 A/R with 3″ OD (outer diameter) V-Band discharge
– V-Band inlet .64 or .82 A/R with V-Band discharge
– T4 Tangential .58 A/R with 3 5/8″ OD (outer diameter) V-Band discharge
– Buick .63 A/R
– GMC Syclone/Typhoon .85 A/R
– K26 .82 A/R
* NOTE: Additional cost may apply for certain housings.
• Available with either a Hydrodynamic 360° thrust bearing system, or an Air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA)